Lamella Clarifier is an efficient water treatment equipment that significantly increases the effective sedimentation area and improves solid-liquid separation efficiency by setting up a large number of inclined plates or inclined tubes in a limited space. It is widely used in the fields of municipal sewage, industrial wastewater, and drinking water treatment.
Product Introduction
Lamella Clarifier system is based on the “shallow pool theory” of GermanHazen professor put forward the early 20th century. Core theory is:sedimentation performance depends on effective setting area, nothing todo with sedimentation depth. Lamella Clarifier system setting area isinclined plate projection area cacumulation.The precipitation area of lamella is accumulated by the projection area ofinclined plate (as shown in the schematic diagram)
Product Advantages
1.Small floor area:
- Lengthen the inclined plate, improve the separation efficiency of the precipitator, and save 1.5-2 times of the floor area.
3.Uniform Water Distribution:
- Through equal resistance water distribution and direct collection of supernatant, to ensure the balance of water distribution of each group ofinclined plates.
5.No Dead Angle or Whirlpool.
2.The Inclined Plate is Not Blocked:
- The inclined angle of the inclined plate is 60 degrees,the plate spacing is 8-10cm, and the inclined plate area is provided with backwash pipe.
4.Strong and Durable:
- 6mm rigid PVC or 2mm stainless steel plate is used as separation sheet, module block type is embedded, high strength and easy to wash and maintain.
6.Smooth Sludge Discharge:
- Scraper (thickener) is used for sludge collecting bucket to ensure that solid sediment is not hardened and silted up.
Application Field
1.Industrial Production Water
3.Pulp & Paper Mill
5.Iron and Steel Industry,
7.Phosphorus Removal
2.Metal Hydroxide Sewage
4.Municipal Sewage
6.Removal of Impurities in Tannery
8.Wastewater Electroplating Wastewater
Technical Parameter
| Modle | Capacity(m³/h) | Mud Scraper Thickener Power(KW) | Dimension(m) | DN(Nozzle list) | |||||
| L | W | H/H1 | Inlet | Outlet | Sludge Outlet | Backwash | |||
| ZL-LC-2 | 2 | 0.25 | 2000 | 1100 | 2700/1900 | DN50 | DN50 | DN50 | DN40 |
| ZL-LC-5 | 5 | 0.25 | 2600 | 1600 | 3400/2500 | DN80 | DN50 | DN50 | DN50 |
| ZL-LC-10 | 10 | 0.25 | 3400 | 1800 | 3800/3000 | DN100 | DN80 | DN50 | DN50 |
| ZL-LC-20 | 20 | 0.25 | 3400 | 2200 | 3800/3000 | DN150 | DN150 | DN50 | DN50 |
| ZL-LC-30 | 30 | 0.25 | 4200 | 2200 | 3800/3000 | DN150 | DN150 | DN50 | DN50 |
| ZL-LC-40 | 40 | 0.25 | 4000 | 2800 | 3800/3000 | DN200 | DN200 | DN50 | DN50 |
| ZL-LC-50 | 50 | 0.25 | 4700 | 2800 | 3800/3000 | DN200 | DN200 | DN50 | DN50 |
| ZL-LC-60 | 60 | 0.25 | 4800 | 3000 | 3800/3000 | DN250 | DN200 | DN50 | DN50 |
| ZL-LC-70 | 70 | 0.25 | 5100 | 3200 | 3800/3000 | DN250 | DN200 | DN50 | DN50 |
| ZL-LC-80 | 80 | 0.25 | 5100 | 3400 | 4000/3200 | DN250 | DN250 | DN80 | DN50 |
| ZL-LC-90 | 90 | 0.25 | 6300 | 3000 | 4000/3200 | DN250 | DN250 | DN80 | DN50 |
| ZL-LC-100 | 100 | 0.25 | 7100 | 3000 | 4000/3200 | DN250 | DN250 | DN80 | DN50 |
| ZL-LC-110 | 110 | 0.25 | 7800 | 3000 | 4000/3200 | DN300 | DN250 | DN80 | DN50 |
| ZL-LC-120 | 120 | 0.25 | 8300 | 3000 | 4000/3200 | 300 | 300 | DN80 | DN50 |
